Elmtronics EVe

Advanced Charging Station for Electric Vehicles

Elmtronics EVe charging station

 Modern design and solid housing

The EVe is the newest charging station in the complete range of charging solutions from Elmtronics.  The EVe has a futuristic design, is suited for two users and offers the latest technology and functionality in  charging stations for electric vehicles.  The housing is composed of a very strong composite material. Therefore the EVe is very robust and suitable for applications on both (semi) private and public locations. The highly compact charging point can be mounted on the wall or on a special pole.

Large LCD display

The EVe is equipped with an RFID reader and can optionally be fitted with a graphic colour display. On the display, charging instructions and transaction data is shown. Additionally, it is possible to display your own logo for a professional appearance. All versions of the charging station are very user-friendly and the charging process can be started or stopped in a few easy and quick steps. The EVe is available in a wide range of capacities, allowing for virtually any application.

High capacity charging with a cost efficient connection

Thanks to the smart electronics in the Eve, the charging station is able to distribute the maximum charging capacity based on the installation. This means that the charging station can be installed on a cost efficient connection but still charge with high power without overloading the installation.

Tested and certified charging station

The EVe is built according to the mode 3 protocol and complies with all relevant international standards. By choosing the EVe, you are choosing a highly safe and reliable charging station.


Charging capacity per outlet
3.7 kW (230v, 16A) 7kW (32a, 230v) 11kW (400V, 16A), 22 kW (32A, 400)
Charging mode
Mode 3, Z.E. Ready 1.2
EV-Plug Type 2, IEC 62196-2
Mains switch
4-poled 80A 400V
Mains connection
40A mains 1-phase (16A 230v) 64A 1-phase (32A 230v) 40A 3-phase 400V 50Hz (11kW version) 64A 3-phase 400V 50Hz (22kW version)
Measurements connection cable
4mm – 25mm
TT systems required to comply with section 722 of BS 7671: 2015
Energy meter
MID approved, suited for payments
Ambient temperature
-20°C to +40°C
5{66bcf18495a8f26304da83093daf405ccefa9115b214b6094fc20813a36028b4} to 95{66bcf18495a8f26304da83093daf405ccefa9115b214b6094fc20813a36028b4}
Plug & Charge RFID (NFC) Mifare 13,56, DESFire
Status information
Separate icons with LED per outlet or colour display
Communication protocol
OCPP 1.2 and 1.5
Communications smart meter
P.I. port

Physical Characteristics

Designed in accordance with
IEC 61851-1 (2010) and IEC 61851-22 (2001) Renault Z.E. Ready guidelines
Ingress Protection Rating
Installation instructions
IEC 61851, NEN 1010
Sheet Moulding Composite (SMC) fibreglass reinforced
Through mounting on the rear side
590 x 338 x 230 (LxWxD)
Wall mount or installation on a pole
Standard colour
Front RAL9016 (Traffic white) Rear RAL7043 (Traffic grey)
Display, pole and base, single user version, standalone or connected to a back office